how to make a polyjuice potion
written by Luna
While it can account for both age and gender, Polyjuice Potion cannot be used for a human to take an animal form, nor can it be used on non-humans or half-humans.
Last Updated
05/31/21
Chapters
3
Reads
600
Brewing instructions
Chapter 2
PART 1, STEP ONE
o Add 3 measures of fluxweed to the cauldron (must have been picked on a full moon).
o Add 2 bundles of knotgrass to the cauldron.
o Stir 4 times, clockwise.
Wave your wand then let potion brew for 80 minutes (for a Pewter Cauldron. A Brass Cauldron will only require
68, and a copper one only 60.)
PART 1, STEP TWO
o Add 4 leeches to the cauldron.
o Add 2 scoops of lacewing flies to the mortar, crush to a fine paste, then add 2 measures of the crushed
lacewings to the cauldron.
o Heat for 30 seconds on a low heat.
o Wave your wand to complete this stage of the potion.
PART 2, STEP ONE
o Add 3 measures of boomslang skin to the cauldron.
o Add 1 measure of bicorn horn to the mortar, crush to a fine powder, then add one measure of the crushed horn to
the cauldron.
o Heat for 20 seconds at a high temperature.
o Wave your wand then let potion brew for 24 hours (for a Pewter Cauldron. A Brass Cauldron will only require
1224 minutes, and a copper one only 18 hours).
PART 2, STEP TWO
o Add 1 additional scoop of lacewings to the cauldron.
o Stir 3 times, counter-clockwise.
o Split potion into multiple doses, if desired, then add the pieces of the person you wish to become.
Wave your wand to complete the potion
o Add 3 measures of fluxweed to the cauldron (must have been picked on a full moon).
o Add 2 bundles of knotgrass to the cauldron.
o Stir 4 times, clockwise.
Wave your wand then let potion brew for 80 minutes (for a Pewter Cauldron. A Brass Cauldron will only require
68, and a copper one only 60.)
PART 1, STEP TWO
o Add 4 leeches to the cauldron.
o Add 2 scoops of lacewing flies to the mortar, crush to a fine paste, then add 2 measures of the crushed
lacewings to the cauldron.
o Heat for 30 seconds on a low heat.
o Wave your wand to complete this stage of the potion.
PART 2, STEP ONE
o Add 3 measures of boomslang skin to the cauldron.
o Add 1 measure of bicorn horn to the mortar, crush to a fine powder, then add one measure of the crushed horn to
the cauldron.
o Heat for 20 seconds at a high temperature.
o Wave your wand then let potion brew for 24 hours (for a Pewter Cauldron. A Brass Cauldron will only require
1224 minutes, and a copper one only 18 hours).
PART 2, STEP TWO
o Add 1 additional scoop of lacewings to the cauldron.
o Stir 3 times, counter-clockwise.
o Split potion into multiple doses, if desired, then add the pieces of the person you wish to become.
Wave your wand to complete the potion
